COVID-19 Updates: State of public health emergency declared.
Alberta Environment and Parks (AEP) or the Alberta Energy Regulator (AER) regulates industrial and municipal facilities. These facilities must follow operating requirements specified in an approval or code of practice. If there’s potential to release substances onto land, the operating requirements must include provisions for monitoring and managing soil contamination.
To learn how to prepare an industrial approval application, see:
- EPEA Approval Process
- Guide to Content for Industrial Approval Applications
- Industrial Release Limits Policy
Sulphur dust on soils
Directive for Monitoring the Impact of Sulphur Dust on Soils (2015)
The Directive specifies the regulatory requirements for monitoring and mitigating the impact of sulphur dust on soils near facilities that handle solid elemental sulphur. Professional guidance is also provided.
This 2015 Directive supersedes the:
- earlier version of the Directive (AEW, 2011)
- Soil Monitoring Guidelines in the department’s 1989 Air Monitoring Directive
The 2015 version of the Directive is in force for relevant Environmental Protection and Enhancement Act (EPEA) approvals as follows:
- No change is required for approvals that reference the amended 2011 Directive as the updated Directive is effective January 1, 2016.
- Approvals that follow the 1989 Soil Monitoring Guidelines must be amended to reflect changes in monitoring and mitigation requirements. These requirements are outlined in the amended 2011 Directive.
- Before amending an approval, approval holders may voluntarily use the 2015 Directive if they clarify reporting requirements with the director. They must choose the updated Directive or remain with the 1989 Soil Monitoring Guidelines in their entirety. They cannot use both.
For more information, see:
- Directive for Monitoring the Impact of Sulphur Dust on Soils (2015)
- Factsheet on the Directive for Monitoring the Impact of Sulphur Dust on Soils
- Development and Validation of Analytical Methods for Elemental Sulphur in Alberta
- Guidelines for Landfill Disposal of Sulphur Waste and Remediation of Sulphur Containing Soils
The Soil Monitoring Directive (2009) must be used for monitoring and managing soil contamination at industrial facilities where such requirements are identified under an EPEA approval. The Directive provides regulatory requirements and professional guidance. For further information, see: Soil Monitoring Directive and fact sheet.
In line with Alberta's contaminated sites management framework, the Directive mandates the use of other regulatory tools, including:
- Part two - Assessment and Reporting – Record of Site Condition Form for Environmental Site Assessment Work
- Part One - Soil and Groundwater Remediation Guidelines
Byproducts for soils
Guidelines for beneficial use of industrial and municipal byproducts for soils include:
- Guidelines for the Application of Municipal Wastewater Sludges to Agricultural Lands
- Guidelines for Municipal Wastewater Irrigation
- Standards and Guidelines for the Land Application of Mechanical Pulp Mill Sludge to Agricultural Land
- Standards and Guidelines for the Use of Wood Ash as a Liming Material for Agricultural Soils
Was this page helpful?
Your submissions are monitored by our web team and are used to help improve the experience on Alberta.ca. If you require a response, please go to our Contact page.
You will not receive a reply. Submissions that include telephone numbers, addresses, or emails will be removed.