The fire danger level in the Peace River Forest Area is now low. Wildfires can still start in colder seasons. Use caution when outdoors.
Wildfire update
There are no active wildfires in the Peace River Forest Area.
As of January 1, 2026, there have been 71 wildfires in the Peace River Forest Area, burning 70 hectares.
For real-time information on wildfires visit the Alberta Wildfire Status Dashboard or download the Alberta Wildfire Status app.
Fall fire safety
Though temperatures are cooler in the fall, vegetation becomes dry and highly flammable. Recreating on public land to hunt, burning brush on private property, or using off-highway vehicles all require caution to prevent wildfires on the landscape.
This hunter made his small cooking fire on a graveled surface away from flammable vegetation.
Cooking and warming campfires
- Use existing campfire rings, both official and unofficial.
- Select a site away from dry grass, brush, leaves, logs, trees and overhanging branches, and peaty areas.
- Use kindling and small branches for a smaller, more manageable fire.
- Keep water nearby.
- When leaving the site, ensure the fire is completely out.
For more information, see campfires on public land.
Safe burning practices
Any burning in the Forest Protection Area (FPA) requires a fire permit from March 1 to October 31, with the exception of a campfire.
Fire permits ensure safe burning practices and allow staff to know where burning is approved, allowing firefighters and aircraft to fight wildfires. Municipalities may have individual rules and restrictions in place. Contact your local municipality for more information.
See Safe burning for more details.
Off-highway vehicles
- Before riding, clean out hot spots and remove debris from the machine.
- After riding through muskeg or tall grass, stop and remove any build-up from the machine.
- Carry firefighting equipment such as a small shovel, collapsible pail or fire extinguisher.
- Wash the OHV and keep it clean – do not wash in streams and creeks.
- Make sure the muffler and spark arrestor are working properly.
- Stop frequently. Take the time to knock debris from the machine’s hot spots. If the debris is smouldering, soak it, stir it and soak it again to make sure it is extinguished.
For more information, see Off-highway vehicle safety.
Contact info
Tannis McNabb
780-617-4851
[email protected]
Published on October 20, 2026 2:56 pm