Slave Lake Forest Area

Slave Lake Forest Area - September 25, 2026

Wildfire situation

There are no active wildfires in the Slave Lake Forest Area. 

Since January 1, 2026, the Slave Lake Forest Area has responded to 67 wildfires and 41 hectares have burned.

See the Alberta Wildfire Status Dashboard for up-to-date information on wildfire locations, status, size, and statistics. By adjusting settings and layers on the dashboard, you can also view forest area boundaries, active fire advisories, restrictions and bans, wildfire danger ratings and much more.

Responsible recreation

If you head outdoors, recreate responsibly on Alberta's public land and help keep our forests safe.

Remember to: 

• Adhere to Alberta Fire Bans.
• When permitted, only create campfires on hard surfaces and/or in campfire rings.
• Keep campfires small, always ensure they are full extinguished and never leave them unattended.
• Properly maintain and clear debris from hotspots on off-highway vehicles (OHVs). For more information, see off-highway vehicle safety.
• Any burning in the Forest Protection Area (FPA), with the exception of a campfire, from March 1 to October 31 requires a fire permit. Request a fire permit online or call your local Forestry office.
• Fireworks and exploding targets are prohibited in the FPA without written consent from a forest officer.

Do your part. Be FireSmart.

Did you know that most homes that are damaged or destroyed by wildland fire are not impacted by the advancing wall of flame, but by ignition from flying sparks and embers? This fire season, take simple steps that reduce the risk to your home.

• A mowed lawn is a fire-resistant lawn. Grasses shorter than 10 cm in height are less likely to burn intensely and may slow the spread of fire.
• Thinning and pruning trees can slow down wildland fire spread. 
• Remove low-hanging branches up to 2 m from the ground.
• Avoid using bark or pine needle mulch within 10 m of your home, as they are highly combustible.
• Gravel mulch and decorative crushed rock mulch significantly reduce the spread of wildland fire.

To learn more, take the free one-hour FireSmart 101 course online.

Firewood permits

A Personal Use Forest Products Permits (PUFPP) is required to collect firewood within the Forest Protection Area. This permit allows you to harvest a limited amount of wood for personal use. Maps are available to help you find a suitable location. Permits can be requested online or in person at the Slave Lake forestry office.